Multipure Aquacomplete Reverse Osmosis Filter (MP750PlusRO)
If you are looking for a water filter to reduce fluoride then the Multipure Reveres osmosis will reduce up to 93% of fluoride from your drinking water.
Multipure Aquacomplete MP750 Plus RO combines Multipure’s renowned carbon block filter technology with the reverse osmosis technology, making it the most technologically advanced System in the world today. The Multipure MP750 Plus RO is the only device certified under NSF/ANSI Standards 42, 53, and 58 to reduce: Nitrates/Nitrate, Arsenic V, Chloramine, PCBs, Toxaphene, Chlordane, Lead, Mercury, Fluoride etc.
The Multipure MP750PlusRO Unit is easy to install and simple to operate. It uses no electricity and the impurities removed through the reverse osmosis process are flushed down the drain. The pre-filter component provides 5 micron filtration to remove large particulate matter and extend the life of the reverse osmosis membrane. The reverse osmosis component reduces the level of Total Dissolved Solids (TDS), rust, dirt scale, and organic tastes and odors. The processed water is conveniently stored in a 3 gallon pressurized tank which is small enough to fit neatly under your sink.
Multi-Pure's MP750PlusRO Unit includes pre-filter, RO membrane, and Multipure’s Model MP750SB as a post-filter, giving you the highest quality water possible.
Multipure’s MP750 Plus Reverse Osmosis System features FIVE Stages of filtration giving you performance that no other device can provide. By combining Multipure’s superior carbon block filter technology with state-of-the-art reverse osmosis, you will receive the highest quality drinking water possible.
Here’s how it works:
Stage 1: The Sediment Pre-Filter screens out particles down to 5 microns, improving the appearance of your water. Recommended filter change (Model No. CBC110): approximately every 6 months.
Stage 2 & Stage 3: Carbon Block Pre-Filters -- next, water passes through two 5 micron Carbon Block Pre-Filters that ensure that chlorine and other materials that cause your water to taste and smell bad are reduced. Recommended filter change (Model No. CBC112): approximately every 6 months.
Stage 4: The RO Membrane is a high-production, 50 gpd, thin film composite semipermeable membrane that separates unwanted inorganic impurities, such as nitrates, fluoride, etc. from your water. This hyperfiltration membrane reduces salts, certain heavy metals, and other impurities, giving you great tasting water. Recommended membrane change (Model No. CB-ROM): approximately every 2 years.
Stage 5: The Carbon Block Post-Filter, the final stage of the water treatment process, provides the most efficient contaminant removal possible. Multipure’s densely compacted carbon block filter mechanically intercepts particles as small as 0.5 micron (sub micron) as well as electrokinectically adsorbs particles by attracting the negative ions of certain contaminants. In addition, the carbon block filter has a large surface area for chemical/physical adsorption to take place, reducing many different organic chemicals, pesticides, herbicides
and certain heavy metals. Recommended filter change (Model No. CB6): approximately once a year.
Multipure’s MP750 Plus Reverse Osmosis System delivers safe, deliciously clear drinking water that is convenient and affordable.
QUESTIONS & ANSWERSAsk a Question
Will it filter out VOC's?
Yes it will filter VOC's
I have had the RO system fjor over 10 years. I need to replace the faucet but should I replace the tank or the containers that hold the filters or tubing as well? How long should I expect them to last?
No you should be good with with the tank and filter housing. They shoudl last for years.